FIDAB-2 Adjustable Bench (Get RX'D)
Made with 7-gauge and 11-gauge steel for maximum stability, the FIDAB-2 Adjustable Bench is the latest in the evolution of Get RX’d weight benches. It’s packed with more features than previous versions of adjustable benches. Some of the main features include the ability to store upright to save space, ability to use as a decline bench, ability to add dumbbell holders for seal rows, minimal gap between seat and back pad, and comes with ultra high-density recycled foam padding covered with non-slip covers.
HEAVY-DUTY BUILD
A 7-gauge and 11-gauge powder-coated steel throughout the frame as the Get RX'd Builder® Rig series to build one of the most stable benches, and able to withstand loads upwards of 1,000 pounds.
UPRIGHT STORAGE
The FIDAB-2 Adjustable Bench features built-in support for vertical storage, saving space when not in use. Simply lift the padded pull handle and tilt the bench up to store it vertically. When stored vertically, the bench’s footprint measures only 18" x 20".
BACK ADJUSTABILITY
Adjust the back pad angle into any of the 7 positions by moving the handle into the desired position, from 0° (flat) to 85° (upright). Angles: 0, 15, 30, 45, 60, 75, 85 degrees.
SEAT ADJUSTABILITY
Taking adjustability, a little further, the seat position can be adjusted by 4 angles for extra comfort at any position: decline, flat, incline, and more incline.
HIGH-DENSITY BACK AND SEAT PADS
The bench pads are made with ultra-high-density, fully recycled foam that won’t compress and lasts longer. Pad thickness measures 2.6".
NON-SLIP GRIP SURFACE
An upgraded non-slip cover provides the extra grip you need for heavy bench days.
OPTIONAL LEG ROLLER ATTACHMENT
An optional Leg Roller Attachment with an easy-to-use adjustable knob adds extra functionality to the already-versatile FIDAB-2 Bench. This attachment makes it possible to perform decline sit-ups, Russian twists, and other exercises that would normally require other accessories or extra floor space.
OPTIONAL DUMBBELL RACK ATTACHMENT
Optional Dumbbell Holders allow you to have easy access for seal rows or use to provide an even heavier base for high-angle decline exercises. Sold as a set of two holders.
MAXIMUM STABILITY
The addition of nylon spacers at the back and seat pads eliminates virtually all side-to-side wobble.
OVERSIZED BACK AND SEAT PADS
The back pad measures 12.5" x 41.7" while the seat pad measures 12.5" wide and tapers to a 9-inch width; both pads measure 2.6" in thickness. A minimal gap between the back and seat pads measures only 1.8" when the bench is in a flat position.
EASY TRANSPORT
A fixed, stainless steel handle attached to the seat and two transport wheels make the bench easy to tilt and roll away between exercises and for storage.
WHEELS WITH METAL GUARDS
Two wheels located at the rear of the bench are protected by steel guards to minimize wear from heavy use. These guards also add stability when the bench is stored vertically.
ATTENTION TO DETAIL
We’ve paid close attention to the details and added nylon protection in the seat and back ladder areas to limit metal-to-metal contact. The back pad handles are protected by urethane. The bench ships in well-protected Styrofoam packaging, making shipping more economical.
POWDER COAT FINISH
The frame is available in 5 powder coat colors: black, blue, red, green, and yellow. Powder coating adds rust resistance.
Made with 7-gauge and 11-gauge steel for maximum stability, the FIDAB-2 Adjustable Bench is the latest in the evolution of Get RX’d weight benches. It’s packed with more features than previous versions of adjustable benches. Some of the main features include the ability to store upright to save space, ability to use as a decline bench, ability to add dumbbell holders for seal rows, minimal gap between seat and back pad, and comes with ultra high-density recycled foam padding covered with non-slip covers.
HEAVY-DUTY BUILD
A 7-gauge and 11-gauge powder-coated steel throughout the frame as the Get RX'd Builder® Rig series to build one of the most stable benches, and able to withstand loads upwards of 1,000 pounds.
UPRIGHT STORAGE
The FIDAB-2 Adjustable Bench features built-in support for vertical storage, saving space when not in use. Simply lift the padded pull handle and tilt the bench up to store it vertically. When stored vertically, the bench’s footprint measures only 18" x 20".
BACK ADJUSTABILITY
Adjust the back pad angle into any of the 7 positions by moving the handle into the desired position, from 0° (flat) to 85° (upright). Angles: 0, 15, 30, 45, 60, 75, 85 degrees.
SEAT ADJUSTABILITY
Taking adjustability, a little further, the seat position can be adjusted by 4 angles for extra comfort at any position: decline, flat, incline, and more incline.
HIGH-DENSITY BACK AND SEAT PADS
The bench pads are made with ultra-high-density, fully recycled foam that won’t compress and lasts longer. Pad thickness measures 2.6".
NON-SLIP GRIP SURFACE
An upgraded non-slip cover provides the extra grip you need for heavy bench days.
OPTIONAL LEG ROLLER ATTACHMENT
An optional Leg Roller Attachment with an easy-to-use adjustable knob adds extra functionality to the already-versatile FIDAB-2 Bench. This attachment makes it possible to perform decline sit-ups, Russian twists, and other exercises that would normally require other accessories or extra floor space.
OPTIONAL DUMBBELL RACK ATTACHMENT
Optional Dumbbell Holders allow you to have easy access for seal rows or use to provide an even heavier base for high-angle decline exercises. Sold as a set of two holders.
MAXIMUM STABILITY
The addition of nylon spacers at the back and seat pads eliminates virtually all side-to-side wobble.
OVERSIZED BACK AND SEAT PADS
The back pad measures 12.5" x 41.7" while the seat pad measures 12.5" wide and tapers to a 9-inch width; both pads measure 2.6" in thickness. A minimal gap between the back and seat pads measures only 1.8" when the bench is in a flat position.
EASY TRANSPORT
A fixed, stainless steel handle attached to the seat and two transport wheels make the bench easy to tilt and roll away between exercises and for storage.
WHEELS WITH METAL GUARDS
Two wheels located at the rear of the bench are protected by steel guards to minimize wear from heavy use. These guards also add stability when the bench is stored vertically.
ATTENTION TO DETAIL
We’ve paid close attention to the details and added nylon protection in the seat and back ladder areas to limit metal-to-metal contact. The back pad handles are protected by urethane. The bench ships in well-protected Styrofoam packaging, making shipping more economical.
POWDER COAT FINISH
The frame is available in 5 powder coat colors: black, blue, red, green, and yellow. Powder coating adds rust resistance.
Made with 7-gauge and 11-gauge steel for maximum stability, the FIDAB-2 Adjustable Bench is the latest in the evolution of Get RX’d weight benches. It’s packed with more features than previous versions of adjustable benches. Some of the main features include the ability to store upright to save space, ability to use as a decline bench, ability to add dumbbell holders for seal rows, minimal gap between seat and back pad, and comes with ultra high-density recycled foam padding covered with non-slip covers.
HEAVY-DUTY BUILD
A 7-gauge and 11-gauge powder-coated steel throughout the frame as the Get RX'd Builder® Rig series to build one of the most stable benches, and able to withstand loads upwards of 1,000 pounds.
UPRIGHT STORAGE
The FIDAB-2 Adjustable Bench features built-in support for vertical storage, saving space when not in use. Simply lift the padded pull handle and tilt the bench up to store it vertically. When stored vertically, the bench’s footprint measures only 18" x 20".
BACK ADJUSTABILITY
Adjust the back pad angle into any of the 7 positions by moving the handle into the desired position, from 0° (flat) to 85° (upright). Angles: 0, 15, 30, 45, 60, 75, 85 degrees.
SEAT ADJUSTABILITY
Taking adjustability, a little further, the seat position can be adjusted by 4 angles for extra comfort at any position: decline, flat, incline, and more incline.
HIGH-DENSITY BACK AND SEAT PADS
The bench pads are made with ultra-high-density, fully recycled foam that won’t compress and lasts longer. Pad thickness measures 2.6".
NON-SLIP GRIP SURFACE
An upgraded non-slip cover provides the extra grip you need for heavy bench days.
OPTIONAL LEG ROLLER ATTACHMENT
An optional Leg Roller Attachment with an easy-to-use adjustable knob adds extra functionality to the already-versatile FIDAB-2 Bench. This attachment makes it possible to perform decline sit-ups, Russian twists, and other exercises that would normally require other accessories or extra floor space.
OPTIONAL DUMBBELL RACK ATTACHMENT
Optional Dumbbell Holders allow you to have easy access for seal rows or use to provide an even heavier base for high-angle decline exercises. Sold as a set of two holders.
MAXIMUM STABILITY
The addition of nylon spacers at the back and seat pads eliminates virtually all side-to-side wobble.
OVERSIZED BACK AND SEAT PADS
The back pad measures 12.5" x 41.7" while the seat pad measures 12.5" wide and tapers to a 9-inch width; both pads measure 2.6" in thickness. A minimal gap between the back and seat pads measures only 1.8" when the bench is in a flat position.
EASY TRANSPORT
A fixed, stainless steel handle attached to the seat and two transport wheels make the bench easy to tilt and roll away between exercises and for storage.
WHEELS WITH METAL GUARDS
Two wheels located at the rear of the bench are protected by steel guards to minimize wear from heavy use. These guards also add stability when the bench is stored vertically.
ATTENTION TO DETAIL
We’ve paid close attention to the details and added nylon protection in the seat and back ladder areas to limit metal-to-metal contact. The back pad handles are protected by urethane. The bench ships in well-protected Styrofoam packaging, making shipping more economical.
POWDER COAT FINISH
The frame is available in 5 powder coat colors: black, blue, red, green, and yellow. Powder coating adds rust resistance.